If a light set is miscoded, users will need to reset the light set within the App before recoding. To “RESET” or recode light set(s):

1. Begin the process by unplugging all light set(s) and then plugging in one light set at a time. The indicator light will change from solid red to solid green once the Wi-Fi connection is active.
2. From the home screen of the App, tap the “RESET” icon in the upper right hand corner.
3. The App will then display a list of coded light sets within range. Select the light set you want to reset from the list and tap OK. This will initiate the reset process and the light set will display an alternating pattern of orange and white LEDs.
4. We recommend turning each light set off for 10 seconds before plugging in and resetting.
5. For resetting rules, please see”?” icon on the upper right side of “RESET” home screen.

To “Super Reset” or change light set(s) coding and password to default factory settings:

1. We recommend using “Super Reset” for forgotten password situation only as it resets not only the password but also the set coding. Super Reset can be done per series coded group or per light set.
2. From the second screen (Wi-Fi status screen) of the App, tap the Super Reset icon (detached plug and end connector symbol) in the upper right hand corner.
3. Tap “OK” to proceed. Follow in-app guide for the whole process.
4. Connect to the light set you want to Super Reset by selecting the light set you want to reset on the available Network list that will be shown. Press “OK” to start process. For series coded light set, you only need to connect to the first light set.
5. This will initiate the reset process and the light set will display an alternating pattern of blue and white (password changed) for approximately 5 seconds then finally orange and white LEDs(coding changed). See Super Reset Rules on upper right hand corner of “Super Reset” screen for more details.
6. Exit process by pressing “ < “ back icon on the upper left of the screen.